Marine Pipe Section

Marine Pipe Section (MPS) is preformed through some mould for technical and industry pipeline. For easy installation, the pipe section is split in one side with a joint cutting on the opposite side. The outer face of the pipe section can be polished to make the consistent and exact insulation thickness in all directions or faced with aluminum foil on request.

Marine Pipe Section 0 Marine Pipe Section 1 Marine Pipe Section 2 Marine Pipe Section 3 Marine Pipe Section 0

Technical Specifications

Standard Specification

Product type

MPS120

MPS140

Inner Dia, inch

2~12

1/2~16

Inner Dia, mm

60~325

22~406

Thickness, mm

50~100

30~100

Nominal Density. kg/ m³

120

140

Length, mm

910, 1000

Other size or density may be available on request

Main Properties

Properties

MPS120

MPS140

Unit

Standard

Thermal conductivity(at 70℃)

≤0.044

≤0.042

W/(m·k)

GB/T 10294

ASTM C518

ASTM C177

Melting Point

≥1000

≥1000

---

Max Service Temperature

ASTM C411

Moisture Absorption

≤0.02

≤0.02

Vol%

ASTM C1104M

Water Repellence

99

99

GB/t 10299

Fire Classification

Non-combustible for pipe section

Low flame spread for facing

---

IMOA.799(19)

IMOA.653(16)

Environment

Asbestos free, no CFCs、HCFCs or HFCs

---

---

Other properties conform to standard of GB/T 11835-2007,JIS 9504 and ASTM C547