Ceramic Fiber Module

Ceramic Fiber Module are made from ceramic fiber blanket. These modules are specially designed to meet or improve the thermal insulation requirements of industrial furnaces. Ceramic fiber modules are produced with various anchoring system to enable quick and efficient installation in most furnace linings. Modules have the highest insulating value achievable in a ceramic fiber. Each module is a continuous folded blanket under compression. Module linings prevent heat loss, increasing the furnace productivity and reducing maintenance cost.

Ceramic Fiber Module 0 Ceramic Fiber Module 1 Ceramic Fiber Module 2 Ceramic Fiber Module 0

Features

  • Fast and easy installation
  • Lower heat storage and fuel costs
  • This design creates a very light lining, less steel equired
  • Several anchor systems

Applications

Ceramic industry

  • Low mass kiln cars
  • Continuous and batch kilns
  • Door Linings
  • Glazing, porcelain furnace linings

Power Generation

  • Duct lining
  • Heat recovery steam system
  • Boiler insulation
  • Stack linings

Refining and Petrochemical

  • Ethylene furnace roof and walls.
  • pyrolysis furnace lining.
  • Reformer furnace roof and walls.
  • Boiler lings

Steel Industry

  • Ladle pre-heaters and covers
  • Heat treat furnace
  • Soaking pit covers and seals
  • Heaters and reformer lining

Others

  • Incineration equipment
  • Burner blocks
  • Induction furnace covers
  • Glass tempering furnace

Technical Specifications

Classification Temperature

1260

1427

Code

EFGTX-1260M

EFGTX-1427M

Shrinkage on heating (%)

1000℃x24h≤-3

1350℃x24h≤-3

Theoretical density (kg/m³)

200-220

Dimension

Thickness

Length

Width

250mm

300mm

300m

*Others dimensions available to special order.

All data represents typical results of standard tests conducted under controlled conditions. As such, the information is intended only as a general guide for specifications and design estimates.