Ceramic Fiber Blanket

Ceramic Fiber Blanket Ceramic Fiber Blanket 1 Ceramic Fiber Blanket 2 Ceramic Fiber Blanket 3

Ceramic Fiber Blanket is manufactured from refractory ceramic fibers and provide effective solutions to a wide spectrum of thermal management problems. Utilizing our proprietary high output blowing and spinning techniques these products offer superior insulating performance, flexibility and resilience. Ceramic fiber blanket products are unaffected by most chemicals (except hydrofluoric & phosphoric acids and concentrated alkali). Thermal and physical properties are retained after drying following wetting by oil, steam or water. Ceramic fiber blanket products are completely inorganic, so there are no fumes when heating for the first time. Available in a variety of chemistry, density and thickness combinations, the ceramic blanket range is one of the most versatile available to the market today.

Features

  • Low Shrinkage
  • High tensile strength
  • Excellent hot strength
  • High resiliency
  • Low thermal conductivity
  • Low heat storage
  • Resistance to thermal shock
  • Good sound absorption
  • High heat reflectance

Applications

Ceramic Industry

  • Kiln car insulation and seals
  • Continuous and batch kilns

Steel Industry

  • Heat treating and annealing furnaces
  • Furnace door linings and seals
  • Soaking pit covers and seals
  • Furnace hot face repairs
  • Reheating furnace and ladle covers

Refining and Petrochemical

  • Reformer and hydrolysis lining
  • Tube seals, gaskets and expansion joints
  • High temperature pipe, duct and turbine insulation
  • Crude oil heater linings

Power Generation

  • Boiler insulation
  • Boiler doors
  • Reusable turbine covers
  • Expansion seals/pipe coverings

Others

  • Insulation of commercial dryers and ovens
  • Veneer over existing refractory
  • Stress relieving insulation
  • Glass furnace crown insulation

Technical Specifications

Classification Temperature

1260

1427

Code

EFGTX-1260T

EFGTX-1427T

Shrinkage on Heating (%)

1000℃x24h≤-3

1350℃x24h≤-3

Thermal Conductivity (W/m.k)(128kg/m³) (Mean temperature:500℃)

≤0.153

≤0.153

Theoretical Density (kg/m³)

96/128

96/128

Tensile Strength (25mm thick) MPa

0.06

0.06

Dimensions

Thickness

Length

Width

25mm

7320

610mm

50mm

3660

610mm

Note: Other dimension available according to negotiation

All data represents typical results of standard tests conducted under controlled conditions.

As such the information is intended only as a general guide for specifications and design estimates.